loading

China's leading brand of switching power solutions for power supply, power adapter and battery charger.

Different from laptop computer, most of users

Even though lithium-ion digital camera battery has little memory effect, it is also necessary to activate by fully charging and discharging once after stored for a long time. Otherwise, the indicator system may be out of work and shut down automatically before all the power energy is consumed, which is also harmful to lithium-ion batteries in recharging cycles.

Caution! If not maintained properly, your digital camera battery capacity will be less and less.

As a matter of fact, digital camera battery at present has displayed all the characteristics of lithium-ion batteries, such as self-discharging, protection circuit, high energy density and sensibility. Except for wrong indicating, some other factors will be even more dangerous, which can make the battery damaged in actual performance.

1. Pay attention to the output voltage of charger.

Nearly all the lithium-ion batteries are sensible to overloading. Therefore, once the output voltage of charger is higher than your digital camera battery, both last time and lifespan will be shorter while overloading is also a primary cause to overheating.

2. Keep away from metal objects and water.

Evidently, metal objects and water are very easy to cause short circuit and even fire. Such accidents are common to mobile phones so that we have no reasons to ignore. Even if not so seriously, high work temperature can reduce its performance and short circuit can burn and destroy the whole battery.

3. Store your digital camera battery in a cool and dry place.

Due to the dangers from heat and damp, please put your digital camera battery in a cool and dry place. If possible, please remove it from the camera and stored in a clean box. With a little power energy remained for discharging, it can also avoid capacity reduction from deep discharging.

4. Get another battery replacement.

As digital camera battery is sensitive to deep discharging, you'd better replace with another replacement if it is indicated to be shortage of power energy. Meanwhile, it is also a good choice to avoid some battery failure accidents.

GET IN TOUCH WITH Us
recommended articles
Info Center News FAQs
What is the difference between LED the RU and UL logo?

1059, 2020 -
05 -

13 09:30:48 for UL certification of different service types we often see different UL certification marks, usually UL marks can be divided into three categories: are UL Listed Listed, UL certification and accreditation Recognized and UL hierarchical Classification three different types of UL marks.
Common problems and solutions in the design of the LED power supply of 2020-986
07 -

01 16:29:37 in current life, in order to save energy, LED by large, but LED all need to have a power drive, it is good or bad will directly affect the service life of the LED, so how to make an LED driving power supply is the key of the LED power supply designer.
LED power supply overvoltage protection circuit is normally what effect is there?

1225, 2020 -
05 -

12 16:55:35 in LED power supply protection circuit design process, the setting of over-voltage protection circuit is essential, can effectively guarantee the normal operation of the whole power system.
LED waterproof power supply protection grade, introduced in 2020-1151
05 -

12 16:55:16 LED waterproof power supply protection grade introduce LED waterproof power supply protection grade abbreviations for IP (

国际保护)
It is thus by IEC (

国际电气技术委员会)

The draft, will prevent outside content invasion, waterproof, dustproof, moisture proof features and classification of a proper noun.
How do you use the USB charger, car charger, 2020-1023
05 -

21 10:53:49 along with the development of the automotive interconnect technology in recent years, mobile phone contact with car is more and more closely, it is also directly contributing to cell phone power consumption faster, so the car charger was born, and quickly spread to most of the owners.
In addition to the characteristics of PWM control itself, like working in a quasi resonant mode, light frequency, dynamic self-supply, low no-load power consumption characteristics, are similar to conventional flyback type circuit.
What is the LED driver power supply?
What is the feature of it?

2533, 2020 -
06 -

04 16:38:12 LED drive power is the power supply is converted into a certain voltage current to drive the LED power converter, normally: LED drive power supply input including high-voltage ac power frequency (
The mains)

Dc, high-voltage direct current, low voltage, low voltage high frequency ac (
Such as electronic transformer output)
And so on.
Why what is aging test, the power adapter do aging test?

1122, 2020 -
06 -

04 16:46:05 aging test, for consumer customers may be very unfamiliar words, then the power adapter manufacturer to simple to explain what is aging test, and why the power adapter do aging test?

Aging test is simple to show the power adapter is in a period of time full use work, to see what's the problem with the power adapter will produce.
Do you really understand what is a switching power supply?

1061, 2020 -
06 -

05 14:23:56 widely use of switching power supply, it is a important part of the electronic design, small, light weight, high efficiency is the key of the future development, how to do have to know what kind of switch power supply have characteristics.
What will you pay attention to when using the car charger, 2020-182
11 -

27 16:53:27, with the development of intelligent car is becoming more and more close contact phone, some cars even can support the direct manipulation of mobile phone.
Info Center
Contact Us
Copyright © 2026 Fuyuan Electronic Co.,Ltd. | Sitemap   | Privacy Policy
Customer service
detect