loading

China's leading brand of switching power solutions for power supply, power adapter and battery charger.

portable charger vs wind up charger

Mobile phones have reached a milestone in the past five years.
Another determinant of using the phone is the battery backup provided by the phone and the frequency of charging.
In the beginning stage, the mobile phone launched is only the basic model.
But right now, it\'s at the top of the line to meet modern technologies and trends like 3g, WIFI, cameras, Bluetooth, etc.
Therefore, the carrying capacity of mobile phones is also constantly decreasing.
There are several types of Chargers to choose from to meet the needs of charging.
Let\'s discuss the pros and cons of charging your phone with a portable charger and wireless charger.
The Portable Charger requires a power supply, which is highly unlikely without a power supply or low voltage.
This fluctuation e. m.
F of the battery.
Since it uses electricity, we should be very careful when handling the charger.
The portable charger does not guarantee the safety of the user.
It is also heavier than the wind charger.
The main advantage of using a portable charger is its compatibility.
It is compatible with all types of phones.
The continuous charging process using a portable charger will soon result in a replacement of the battery.
The Windup charger does not require any power to charge the mobile device.
The basic principle outside of this charge is energy conversion.
It consists of a handle that needs to be wound.
This handle rotates about 25-
30 minutes will provide enough energy for your mobile device.
In the process, the prototype of the wind charger uses the stored kinetic energy to charge the phone.
Therefore, it is a hundred percent safe compared to the portable charger.
In this type of charger, the LED is used to indicate the energy level of the battery.
It is light in weight and compact in nature.
The main drawback of using the windup charger is its compatibility.
It is not compatible with some devices.
The energy level is judged by the LED, so the charging process can be stopped when the mobile device is fully charged.
No need to replace the battery.
The Wind up Charger provides users with high reliability and low maintenance costs.
The power generation by winding the handle makes people have the consciousness of saving energy and protecting the environment.
The worst thing about portable charging is going through high power shock waves at some point.
When a user operates a mobile device when connected to mains via a portable charger, a shock wave is generated and passed through the mobile device.
Therefore, the insecurity of portable charger equipment is realized.
But in the use of the wireless charger, it is very impossible to use the mobile phone during the charging process.
Only when the phone is not in use will the battery be charged by turning the handle.
The Windup charger simply plugs into the phone using a jack plug or other connector, while the portable charger is directly connected to the terminal of the phone.
The real-time application of the Windup charger is well known to sailors.
When they travel at sea, they can\'t find any power to connect to the portable charger.
At that time, a saturated charger was used.
Therefore, the wind charger can be installed where it is not possible to install the portable charger.
Therefore, due to the non-power consumption and security of the windup charger, its use will be effective.
But the performance of the portable charger is not the worst.
The only determining factor is safety.
To keep the world in a state of ecological protection, it is recommended to use eco-friendly chargers such as windup chargers.
Practical applications can only be known in case of emergency.
Therefore, by reducing the use of mobile phones, the number of charges will also be greatly reduced.
By optimizing the charge, a healthy environment can be maintained.

GET IN TOUCH WITH Us
recommended articles
Info Center News FAQs
What is the difference between LED the RU and UL logo?

1059, 2020 -
05 -

13 09:30:48 for UL certification of different service types we often see different UL certification marks, usually UL marks can be divided into three categories: are UL Listed Listed, UL certification and accreditation Recognized and UL hierarchical Classification three different types of UL marks.
Common problems and solutions in the design of the LED power supply of 2020-986
07 -

01 16:29:37 in current life, in order to save energy, LED by large, but LED all need to have a power drive, it is good or bad will directly affect the service life of the LED, so how to make an LED driving power supply is the key of the LED power supply designer.
LED power supply overvoltage protection circuit is normally what effect is there?

1225, 2020 -
05 -

12 16:55:35 in LED power supply protection circuit design process, the setting of over-voltage protection circuit is essential, can effectively guarantee the normal operation of the whole power system.
LED waterproof power supply protection grade, introduced in 2020-1151
05 -

12 16:55:16 LED waterproof power supply protection grade introduce LED waterproof power supply protection grade abbreviations for IP (

国际保护)
It is thus by IEC (

国际电气技术委员会)

The draft, will prevent outside content invasion, waterproof, dustproof, moisture proof features and classification of a proper noun.
How do you use the USB charger, car charger, 2020-1023
05 -

21 10:53:49 along with the development of the automotive interconnect technology in recent years, mobile phone contact with car is more and more closely, it is also directly contributing to cell phone power consumption faster, so the car charger was born, and quickly spread to most of the owners.
In addition to the characteristics of PWM control itself, like working in a quasi resonant mode, light frequency, dynamic self-supply, low no-load power consumption characteristics, are similar to conventional flyback type circuit.
What is the LED driver power supply?
What is the feature of it?

2533, 2020 -
06 -

04 16:38:12 LED drive power is the power supply is converted into a certain voltage current to drive the LED power converter, normally: LED drive power supply input including high-voltage ac power frequency (
The mains)

Dc, high-voltage direct current, low voltage, low voltage high frequency ac (
Such as electronic transformer output)
And so on.
Why what is aging test, the power adapter do aging test?

1122, 2020 -
06 -

04 16:46:05 aging test, for consumer customers may be very unfamiliar words, then the power adapter manufacturer to simple to explain what is aging test, and why the power adapter do aging test?

Aging test is simple to show the power adapter is in a period of time full use work, to see what's the problem with the power adapter will produce.
Do you really understand what is a switching power supply?

1061, 2020 -
06 -

05 14:23:56 widely use of switching power supply, it is a important part of the electronic design, small, light weight, high efficiency is the key of the future development, how to do have to know what kind of switch power supply have characteristics.
What will you pay attention to when using the car charger, 2020-182
11 -

27 16:53:27, with the development of intelligent car is becoming more and more close contact phone, some cars even can support the direct manipulation of mobile phone.
Info Center
Contact Us
Copyright © 2026 Fuyuan Electronic Co.,Ltd. | Sitemap   | Privacy Policy
Customer service
detect