loading

China's leading brand of switching power solutions for power supply, power adapter and battery charger.

When it comes to Surge Protection, I am of the

A lot of homes probably have outdated power strips that provide little or no protection against power surges or in extreme cases, lightening strikes. The cost of providing some rudimentary protection is minimal when compared to the cost of replacing the electronic items themselves. The average retail purchase price of a 4-way surge protection strip is around 6, depending on the length of extension cable required with it. Individual surge plug adapters come in at an average price of 5.50. The price increases if you also require AV protection, which is designed to protect equipment connected to your phone line or coaxial cable connection.

Voltage spikes caused by fluctuations in the mains power supply from the power company are the main cause of damage to electrical devices. A surge protection device will harmlessly short the excess voltage to ground and away from sensitive equipment. Any surge suppression device will have a Joules rating associated with it. As a Joule is a measure of energy, this rating indicates how much of the energy caused by a voltage spike can be absorbed. The joules figure quoted on any surge strip or surge adapter can be confusing and misleading, but I would look for a figure in excess of 250 Joules and hopefully significantly more than that.

Surge suppression devices normally incorporate a Metal Oxide Varistor to divert any excess energy safely to ground. An MOV is a simple device comprising two metal oxide semiconductors that have variable resistance. When the voltage is high then the resistance in the MOV is low, therefore harmlessly directing the additional current to flow to ground. As the voltage returns to normal levels, the resistance in the MOV also increases, thus allowing normal current to flow to any attached electrical devices. The point at which the MOV will divert current away from connected devices is know as the clamping voltage, with common ratings being somewhere between 300-500 volts.

The time it takes for surge protection device to respond to an increase in voltage is known as the response time, which is normally measured in nanoseconds, whilst research has shown that voltage spikes take significantly longer to reach their peak voltage.

Now back to our original statement about the number of households with inadequate surge protection. It is important that the message goes out to the public about the advantages of using surge suppression equipment, and the possible consequences of not investing in it. A few pounds investment could save hundred or thousands of pounds in damaged equipment. Even if the devices are covered under an insurance policy, there is also the inconvenience of being without your treasured home entertainment system while an insurer processes the claim.

On a final note, surge protection devices that commonly use MOVs, have a limited lifespan depending on how many voltage spikes they experience and the severity of them. Good surge suppression products will have an indicator light to provide a visual indication that surge protection is being given. If those visual indicators suggest that the device is faulty or worn out, then it is time to replace the device. No real time period can be put on the life expectancy of a surge strip, because it is really down to the quality and reliability of the mains power supply itself. If you are not using surge protection, then I would seriously recommend that you consider It soon.

GET IN TOUCH WITH Us
recommended articles
Info Center News FAQs
What is the difference between LED the RU and UL logo?

1059, 2020 -
05 -

13 09:30:48 for UL certification of different service types we often see different UL certification marks, usually UL marks can be divided into three categories: are UL Listed Listed, UL certification and accreditation Recognized and UL hierarchical Classification three different types of UL marks.
Common problems and solutions in the design of the LED power supply of 2020-986
07 -

01 16:29:37 in current life, in order to save energy, LED by large, but LED all need to have a power drive, it is good or bad will directly affect the service life of the LED, so how to make an LED driving power supply is the key of the LED power supply designer.
LED power supply overvoltage protection circuit is normally what effect is there?

1225, 2020 -
05 -

12 16:55:35 in LED power supply protection circuit design process, the setting of over-voltage protection circuit is essential, can effectively guarantee the normal operation of the whole power system.
LED waterproof power supply protection grade, introduced in 2020-1151
05 -

12 16:55:16 LED waterproof power supply protection grade introduce LED waterproof power supply protection grade abbreviations for IP (

国际保护)
It is thus by IEC (

国际电气技术委员会)

The draft, will prevent outside content invasion, waterproof, dustproof, moisture proof features and classification of a proper noun.
How do you use the USB charger, car charger, 2020-1023
05 -

21 10:53:49 along with the development of the automotive interconnect technology in recent years, mobile phone contact with car is more and more closely, it is also directly contributing to cell phone power consumption faster, so the car charger was born, and quickly spread to most of the owners.
In addition to the characteristics of PWM control itself, like working in a quasi resonant mode, light frequency, dynamic self-supply, low no-load power consumption characteristics, are similar to conventional flyback type circuit.
What is the LED driver power supply?
What is the feature of it?

2533, 2020 -
06 -

04 16:38:12 LED drive power is the power supply is converted into a certain voltage current to drive the LED power converter, normally: LED drive power supply input including high-voltage ac power frequency (
The mains)

Dc, high-voltage direct current, low voltage, low voltage high frequency ac (
Such as electronic transformer output)
And so on.
Why what is aging test, the power adapter do aging test?

1122, 2020 -
06 -

04 16:46:05 aging test, for consumer customers may be very unfamiliar words, then the power adapter manufacturer to simple to explain what is aging test, and why the power adapter do aging test?

Aging test is simple to show the power adapter is in a period of time full use work, to see what's the problem with the power adapter will produce.
Do you really understand what is a switching power supply?

1061, 2020 -
06 -

05 14:23:56 widely use of switching power supply, it is a important part of the electronic design, small, light weight, high efficiency is the key of the future development, how to do have to know what kind of switch power supply have characteristics.
What will you pay attention to when using the car charger, 2020-182
11 -

27 16:53:27, with the development of intelligent car is becoming more and more close contact phone, some cars even can support the direct manipulation of mobile phone.
Info Center
Contact Us
Copyright © 2026 Fuyuan Electronic Co.,Ltd. | Sitemap   | Privacy Policy
Customer service
detect