loading

China's leading brand of switching power solutions for power supply, power adapter and battery charger.

which seems to have become a classic, in accordance

First, to explain a term: C

Nominal current of the battery capacity is based on an expression of the control methods, such as the battery is a 1000mAh capacity, 1C charge current is 1000mA, attention mA is not the mAh, 0.01C is 10mA.

1,12-14 hours of origin: the first generation of nickel-cadmium batteries, the need to charge a small magnification, the general recommendations of the charge current 1/10C, such as your battery capacity is 600mAh, then 1C is 600mA, 1/10C is 60mA . Therefore, the full power needs of more than 10 hours, for nickel-cadmium batteries, charging a small magnification is good.

2, at present mobile phones equipped with the battery situation: the mainstream mobile phones are essentially lithium-ion batteries, the latest from our impressions should be 3210, with the nickel-metal hydride batteries, all around us seem to find any phone with a nickel-metal hydride batteries .

3, lithium-ion battery knowledge: we can only say one volume. To measure the capacity of a lithium-ion battery There are two detection methods: 1C charge, 0.2C discharge; 0.2C charge, 0.2C discharge, regardless of what charging standard, should be compliance. Because the lithium-ion battery is different from the previous nickel-cadmium batteries in, 1C charging high magnification already had enjoyed, but also must be receptive of the idea. And if a 600mAh battery with 1C charge, 1 hour charge should eat, and if the phone is designed for direct charge is the case (many of which are 0.5C-0.8C) ,12-14 hour is nonsense.

In order to set national standards GB/T18287 2000, when the constant current charge to 4.2V, switch to constant pressure, when the current drops to 0.01C immediately upon the termination of that charge. For example, charger charging current is 0.5C, rechargeable 600mAh battery, 2 hours or so the charge current drops 6mAh, at this time that the charge had been saturated. Why is it down to 0.01C? As it is already saturated, which is a reflection of batteries.

In fact, on the nickel-metal hydride power, national standards have also been provided for high-rate charge and discharge of the indicator, and now I will not dwell.

4, what is considered 'active'? Lithium-ion battery itself is a 'living', and if the design capacity of 600mAh, although I charge 2 hours to eat, and then discharge, can be the capacity 600mAh, the design capacity can be achieved, and this what is the problem do not live live ? Technical supervision departments to implement national standards, testing capacity is charged with 1C, and then put 5 times in one capacity or to be eligible. So normal use, normal charging can be, with the new battery so go on, do not worry, 'shock did not live.'

5, charge 14 hours a fool ourselves: direct charge mobile phone, 2 hours or so have been filled, and the remaining time is 'roasted' computer time, such as mobile phones charge controlling the error of (some), then is the test of time for the battery . Not use the Charger off (too much on the market) charge 14 hours, your battery has not yet begun to provide services for you already greatly frightened the

GET IN TOUCH WITH Us
recommended articles
Info Center News FAQs
What is the difference between LED the RU and UL logo?

1059, 2020 -
05 -

13 09:30:48 for UL certification of different service types we often see different UL certification marks, usually UL marks can be divided into three categories: are UL Listed Listed, UL certification and accreditation Recognized and UL hierarchical Classification three different types of UL marks.
Common problems and solutions in the design of the LED power supply of 2020-986
07 -

01 16:29:37 in current life, in order to save energy, LED by large, but LED all need to have a power drive, it is good or bad will directly affect the service life of the LED, so how to make an LED driving power supply is the key of the LED power supply designer.
LED power supply overvoltage protection circuit is normally what effect is there?

1225, 2020 -
05 -

12 16:55:35 in LED power supply protection circuit design process, the setting of over-voltage protection circuit is essential, can effectively guarantee the normal operation of the whole power system.
LED waterproof power supply protection grade, introduced in 2020-1151
05 -

12 16:55:16 LED waterproof power supply protection grade introduce LED waterproof power supply protection grade abbreviations for IP (

国际保护)
It is thus by IEC (

国际电气技术委员会)

The draft, will prevent outside content invasion, waterproof, dustproof, moisture proof features and classification of a proper noun.
How do you use the USB charger, car charger, 2020-1023
05 -

21 10:53:49 along with the development of the automotive interconnect technology in recent years, mobile phone contact with car is more and more closely, it is also directly contributing to cell phone power consumption faster, so the car charger was born, and quickly spread to most of the owners.
In addition to the characteristics of PWM control itself, like working in a quasi resonant mode, light frequency, dynamic self-supply, low no-load power consumption characteristics, are similar to conventional flyback type circuit.
What is the LED driver power supply?
What is the feature of it?

2533, 2020 -
06 -

04 16:38:12 LED drive power is the power supply is converted into a certain voltage current to drive the LED power converter, normally: LED drive power supply input including high-voltage ac power frequency (
The mains)

Dc, high-voltage direct current, low voltage, low voltage high frequency ac (
Such as electronic transformer output)
And so on.
Why what is aging test, the power adapter do aging test?

1122, 2020 -
06 -

04 16:46:05 aging test, for consumer customers may be very unfamiliar words, then the power adapter manufacturer to simple to explain what is aging test, and why the power adapter do aging test?

Aging test is simple to show the power adapter is in a period of time full use work, to see what's the problem with the power adapter will produce.
Do you really understand what is a switching power supply?

1061, 2020 -
06 -

05 14:23:56 widely use of switching power supply, it is a important part of the electronic design, small, light weight, high efficiency is the key of the future development, how to do have to know what kind of switch power supply have characteristics.
What will you pay attention to when using the car charger, 2020-182
11 -

27 16:53:27, with the development of intelligent car is becoming more and more close contact phone, some cars even can support the direct manipulation of mobile phone.
Info Center
Contact Us
Copyright © 2026 Fuyuan Electronic Co.,Ltd. | Sitemap   | Privacy Policy
Customer service
detect